Filter
Top Products
Black Box Harde hernet Switch ned Managed Et
forwarding state.
4. Example:
The following example enables or disabl
bridge GROUP (1):
switch_a(config)#bridge 1 rapid-spanning-
switch_a(config)#no bridge 1 rapid-spanning-tree enable bridge-forward
switch_a(config)#
es the rapid-spanning-tree on
tree enable
Spanning Tree Protocol:
5. Command Mode: Configure mode
Logon to Configure Mode (Configure Termin
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
al Mode).
6. Usage:
Use this command to enable the Spanning Tree protocol on a bridge.
Use the no form of the command ol on a
bridge.
7. Command Syntax:
bridge GROUP spanning-tree enable
no bridge GROUP spanning-tree enable BRIDGE-FORWARD
GROUP <1-1> Bridge group name used for bridging.
BRIDGE-FORWARD Puts all ports of the specified bridge into the
forwarding state.
8. Example:
The following example enables or disables the spanning-tree on bridge
GROUP (1):
switch_a(config)#bridge 1 spanning-tree enable
switch_a(config)#no bridge 1 spanning-tree enable bridge-forward
switch_a(config)#
ax:
bridge GROUP spanning-tree enable
no bridge GROUP spanning-tree enable BRIDGE-FORWARD
GROUP <1-1> Bridge group name used for bridging.
BRIDGE-FORWARD Puts all ports of the specified bridge into the
forwarding state.
8. Example:
The following example enables or disables the spanning-tree on bridge
GROUP (1):
switch_a(config)#bridge 1 spanning-tree enable
switch_a(config)#no bridge 1 spanning-tree enable bridge-forward
switch_a(config)#
to disable the Spanning Tree protoc
Bridge Priority (0..61440):
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use this command to set bridge priority for the common instance. Using a
lower priority indicates a greater likelihood of the bridge becoming root.
3. Command Syntax:
User’s Manual 111