Filter
Top Products
Chapter 8 Receiving Faxes 8-5
Receiving Faxes
Receiving Faxes Automatically: FAX ONLY MODE
When the MultiPASS C70 is set up for a dedicated line, set FAX ONLY
MODE to automatically receive documents whenever a call comes over
the fax line.
Setting FAX ONLY MODE
Your MultiPASS C70 is factory-set to FAX ONLY MODE. If you have not
changed the receive mode to Fax/Tel Mode or NET SWITCH, simply
follow this procedure:
1. Press Receive Mode to select FAX ONLY MODE.
❏ After a few seconds, the LCD display changes to the following
display:
Ex:
If you have previously set FAX/TEL AUTO SW or NET SWITCH in the
RX MODE setting of the RX SETTINGS menu, you will have to change
the mode back to FAX ONLY MODE. Follow this procedure:
1. Press Function.
2. Press Data Registration.
3. Press Set.
USER SETTINGS
Set
DATA REGSTRATION
01
Data Registration
Function
15:00 FaxOnly
FAX ONLY MODE
Receive Mode