Filter
Top Products
Chapter 2 Setting Up Your MultiPASS C70 2-21
Setting Up Your
MultiPASS C70
Connect the power cord as follows:
1. Plug the supplied power cord into the power cord connector on the
back of the MultiPASS C70.
2. Plug the other end of the power cord into a properly grounded AC
outlet (three-pronged outlet).
n
The MultiPASS C70 has no power switch, so its power is on as long as it
is plugged in. Once connected, though, the unit still needs to warm up
before you can use it.
❏ While the MultiPASS C70 is warming up, the Alarm light blinks
and the following message appears in the LCD display:
❏ When the time and receive mode appear, the MultiPASS C70 is
in standby mode and ready for use.
Ex:
13:30 FaxOnly
PLEASE WAIT