Chapter 1 Introducing the MultiPASS C70 1-21
Introducing the
MultiPASS C70
❏ Unplug the MultiPASS C70 from the wall outlet and refer service to
qualified personnel under the following conditions:
• When the power cord or plug is damaged or frayed.
• If liquid has spilled into the unit.
• If the unit has been exposed to rain or water.
• If the unit does not operate normally when you have followed the
instructions in this guide. Adjust only those controls that are
covered by the operating instruction in this guide. Improper
adjustment of other controls may result in damage and may
require extensive work by a qualified technician to restore the
product to normal operation.
• If the unit has been dropped or the cabinet has been damaged.
• If the unit exhibits a distinct change in performance, indicating a
need for service.
❏ Plug the MultiPASS C70 into a standard 200–240 V AC power outlet.
Do not attempt to use it outside of the country where you purchased
it.
❏ Do not plug the MultiPASS C70 into the same circuit as an appliance
such as an air conditioner, electric typewriter, television, or copier.
Such devices generate electrical noise that can interfere with your
MultiPASS C70’s ability to send and receive faxes.
❏ Check the plug frequently and make sure that it is firmly plugged
into the socket.
c
This product emits low level magnetic flux.
If you use a cardiac pacemaker and feel abnormalities, please move
away from this product and consult your doctor.