Filter
Top Products
Chapter 8 Receiving Faxes 8-15
Receiving Faxes
Follow the procedure below to receive a fax manually:
3. When you hear the handset, telephone, or extension phone ring,
pick up the handset.
If you hear a person’s voice:
4. Start your conversation. If the caller wants to send a fax after
talking to you, ask them to press the start button on their fax
machine. When you hear a slow beep, press Start/Scan on the
MultiPASS C70 to begin receiving the fax. Hang up the handset.
❏ If the telephone is located away from your unit, dial 25 (the
remote receiving ID) on your telephone and hang up.
If you hear a slow beep tone or silence:
4. Someone is trying to send you a fax.
If the telephone is close to your unit, press Start/Scan on the
MultiPASS C70. Hang up the handset.
❏ If the telephone is located away from your unit, dial 25 (the
remote receiving ID) on your telephone and hang up.
❏ The MultiPASS C70 begins receiving the fax.
n
❏ You can change the number for the remote receiving ID (00 to 99) or
turn the feature off. (1 REMOTE RX, pp. 14-11, 14-12)
❏ The unit will make a beeping sound if the handset is not hung up
properly. This is called the offhook alarm and can be turned off.
(1 OFFHOOK ALARM, pp. 14-5, 14-6)
❏ Be sure to hang up the handset after you press the Start/Scan button
or dial the remote receiving ID for remote receiving; otherwise the
call will be disconnected.
❏ If you have an answering machine connected to your MultiPASS C70
that can carry out remote-control operations (controlling your
answering machine from a remote telephone), the security code for
this function may be the same as the two-digit ID code described
above. If so, make sure you change the MultiPASS C70’s two-digit ID
code to make it distinct from the answering machine’s security code.
(1 REMOTE RX, pp. 14-11, 14-12)
Start / Scan
Start / Scan