Filter
Top Products
14-6 Summary of Settings Chapter 14
DATE & TIME
UNIT TELEPHONE #
UNIT NAME
TX TERMINAL ID
TTI POSITION
TELEPHONE # MARK
SCAN CONTRAST
OFFHOOK ALARM
VOLUME CONTROL
CALLING VOLUME
KEYPAD VOLUME
ALARM VOLUME
LINE MONITOR
VOL
RX CALL LEVEL
TEL LINE TYPE
R-KEY SETTING
Set the date using the numeric buttons. Set the time
(24-hour clock) using the numeric buttons.
Enter your fax/telephone number using the numeric
buttons (up to 20 digits).
Enter your name or company name you want to appear at
the top of each fax page you send (up to 24 characters).
Set the TTI POSITION and TELEPHONE # MARK features.
Select the position for the identification header (TTI) that
appears on every page you send.*
OUTSIDE IMAGE: Position the TTI outside the image area.
INSIDE IMAGE: Position the TTI inside the image area.
Select the prefix for the number.
Select the contrast of the reproduction.
DARKER: Select for light originals.
LIGHTER: Select for dark originals.
Enable/disable the off hook alarm. The alarm alerts you
that the handset or the handset of the telephone or
extension phone is off hook.
Select the audio level of the following sounds:
Select the volume of the ring produced when the
MultiPASS C70 detects a voice call.
Select the volume of the keypad touch beep. (For no
sound, select “0”.)
Select the volume of the error alarm sound. (For no sound,
select “0”.)
Select the volume of the line monitor (sound during
dialling). (For no sound, select “0”.)
Select the volume of incoming calls.
Select the dialling method the MultiPASS C70 uses to
match the telephone line type you have.
Select PBX if your MultiPASS C70 is connected through a
switchboard (PBX). (1 p. 9-2)
If you select PBX, select the PBX type. You can select from
HOOKING, EARTH CONNECTION, and PREFIX.
–
–
–
ON/OFF
OUTSIDE IMAGE/
INSIDE IMAGE
FAX/TEL
STANDARD/
DARKER/
LIGHTER
ON/OFF
–
1/2/3
0/1/2/3
0/1/2/3
0/1/2/3
HIGH/STANDARD
TOUCH TONE/
ROTARY PULSE
PSTN/PBX
Name Description Settings
(Default settings are shown in bold type.)
*Can only be adjusted for black & white transmissions. For colour transmissions, the TTI information is positioned inside
the image area.
User Settings Menu