Filter
Top Products
8-14 Receiving Faxes Chapter 8
Receiving Faxes Manually: MANUAL MODE
In MANUAL MODE, if you connect the handset, a telephone, or an
extension phone to your unit, you can receive normal telephone calls
and also activate your MultiPASS C70 to start receiving a document. If
you place the extension phone away from the MultiPASS C70 (on your
desk, for example) and activate receiving from this phone, this is called
remote receiving.
Setting MANUAL MODE
n
❏ For this mode, you need to have the handset, a telephone, or an
extension phone connected to your unit. (1 pp. 2-18, 2-19)
❏ Make sure the REMOTE RX setting in the RX SETTINGS menu is
enabled (1 pp. 14-11, 14-12). You can also enable this setting from
the MultiPASS Desktop Manager. (1 MultiPASS Suite Software User’s
Guide)
Follow the procedure below to set the receive mode to MANUAL MODE:
1. Press Receive Mode to select MANUAL MODE.
❏ After a few seconds, the LCD display changes to the following
display:
Ex:
Receiving a Fax Manually
Before attempting to receive manually, confirm that you have done the
following:
1. Make sure Manual is displayed in the LCD display.
Ex:
2. Make sure you have connected the handset, a telephone, or an
extension phone to the MultiPASS C70. (1 pp. 2-18, 2-19)
15:00 Manual
15:00 Manual
MANUAL MODE
Receive Mode