Filter
Top Products
11-6 Reports and Lists Chapter 11
Transmission (TX) Reports
For details on enabling or disabling printing of the transmission report,
refer to the TX REPORT setting in the REPORT SETTINGS menu.
(1 pp. 14-7, 14-8)
Error TX Report
The MultiPASS C70 is set to print a report if an error occurs during sending.
This is the default setting for the TX REPORT setting. (1 TX REPORT,
pp. 14-7, 14-8)
TX Report
You can change the TX REPORT setting to print a transmission (TX)
report for every document you send. (1 TX REPORT, pp. 14-7, 14-8)
***********************
***********************
*** ***
TX REPORT
TRANSMISSION OK
TX/RX NO 0003*
CONNECTION TEL 1 432 2060
CONNECTION ID Canon OPTICS
ST. TIME 27/12 14:59
USAGE T 00’18
PGS. SENT 1
RESULT OK
27/12 2000 14:59 FAX 123 4567 CANON 001
*******************************
*******************************
*** ***
ERROR TX REPORT
TX FUNCTION WAS NOT COMPLETED
TX/RX NO 0003*
CONNECTION TEL 1 432 2060
CONNECTION ID Canon OPTICS
ST. TIME 27/12 14:59
USAGE T 00’00
PGS. SENT 0
RESULT NG #018 BUSY/NO SIGNAL
27/12 2000 14:59 FAX 123 4567 CANON 001
*For colour transmissions, the message “:COLOR TX” is printed next to the
TX/RX NO.