Filter
Top Products
13-26 Tr oubleshooting Chapter 13
Fonts do not print as smoothly rounded characters.
Bitmapped fonts designed for dot matrix printers do not print
smoothly rounded characters when used with high resolution printers
like the MultiPASS C70.
❏ Make sure you installed an outline font manager, such as Adobe
®
Type Manager or Bitstream
®
Facelift, or that you are choosing a
TrueType
®
font.
Certain MS fonts, such as MS Serif, will print jagged.
❏ Choose another font.
Output is faint.
You may be using Draft print quality.
❏ Try using a different print mode. (1 MultiPASS Suite Software User’s
Guide)
Printing takes too much time.
You may be using Fine mode.
❏ Turn off Fine mode. (1 MultiPASS Suite Software User’s Guide)
The printout contains blurred or smudged ink.
The print medium you are using may not be supported by the
MultiPASS C70.
❏ Try a different paper type. However, use only print media specified
in this guide. (1 Chapter 5, Paper Handling)
You may be printing on the wrong side of the sheet.
❏ Some papers have a “right” side for printing. If the print quality is
not as clear as you would like it to be, try turning the paper over
and printing on the other side.