Filter
Top Products
User Command Specifications
9．Details of command GET HUE
1
GET HUE
GET HUE
GET□HUE
?△HUE
g
:HUE=<Hue value settin
g
：Number>
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
With some input signals, it may not be possible to make this inquiry.
-2 The hue can be set by the HUE command.
> GET HUE or ? HUE
< g:HUE=1
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
* If the command cannot be supported, 'INVALID_MODE,' 'NOT_POWER_SUPPLIED' or 'INVALID_SOURCE' is returned as an error response.
* If the necessary signals are not input, 'INVALID_SIGNAL (*****)' or 'NO_SIGNAL' is returned.
* "i:BUSY" may be returned if the power status is being switched.
×
○
○
×
SX60
○
×
X600
–
––
SX6
×××
○○
×××
○
○
○
×
–
○○
×
––
––×××
○
SX50 ×
○
×
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power
Input Mode
Remote Local
○○
Commands
Function
Format
Description
Response
Control
Setting Reference
SX50 SX6
This inquires about the current hue value set.
Number
SX60 X600
Mode
Command
s
supported
Example
Hue value setting inquir
y
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
01.00** 01.01** 01.01** 01.01**
○○
PAGE 93