Filter
Top Products
User Command Specifications
9．Details of command RANGE DGAMMA
1
RANGE DGAMMA
RANGE DGAMMA
RANGE□DGAMM
A
r:DGAMMA=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE DGAMMA
< r:DGAMMA=I, 0, 1
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Command
s
supported
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
The dynamic gamma setting value can be selected by the DGAMMA command.
X600
SX60
×○○○○ ○○○
SX6
○○○
– ○○×
SX50
○○○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power
Input Mode
Remote Local
○○○○
01.01**
Dynamic gamma setting option reques
t
Mode Control Setting ReferenceCommands
Function
Format
Example
Description
Response
ID
○○○–
This inquires about the parameter options which enable the dynamic gamma to be set.
01.00** 01.01** 01.01**
SX60 X600SX50 SX6
PAGE 143