Filter
Top Products
User Command Specifications ９．Details of command RANGE DPON
1
RANGE DPON
RANGE DPON
RANGE□DPON
r:DPON=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
For all other res
p
onses, refer to
"Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（
Refer to the
ZCONTDRV command and FCONTDRV command.
）
(2)
Direct power-on can be set using the
DPON command
.
> RANGE DPON
< r:DPON=I, ON, OFF
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
ーーー
×○×
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
su
pp
orted
Example
X600
SX60
○○○×○○○○
SX6
○○○
-ーーーーーー-
SX50
ーーー
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power supply
Input Mode
Remote Local
×○○○
０１．００** ０１．０１** ０１．０１** ０１．０１**
Reference
SX50 SX6 SX60 X600
SettingControlMode
ＩＤ
Description
Response
This command is used to inquire about the parameter options which enable direct power-on to be set.
Commands
Function
Format
Direct power-on setting inquiry
PAGE 171