Filter
Top Products
User Command Specifications
9．Details of command GET MODE
1
GET MODE
GET MODE
This inquires about the current control mode.
-1
-2
-3
a.
b.
> GET MODE or ?MODE
< g:MODE=REMOTE
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
○○○
○○○
X600
SX60
○○○○○○○○
SX6
○○○
– ○○○
SX50
○○○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power
Input Mode
Remote Local
○○○○
01.00** 01.01** 01.01** 01.01**
Commands
Function
Format
Response
○○○–
X600SX50 SX6
Mode Meaning
For details on the control modes of the user commands, refer to the control mode.
This inquiry can be executed in any status provided that AC power is supplied to the projector.
Command
s
supported
Current control mode inquir
y
Mode Control
GET□MODE
?△MODE
SX60
Example
Description
ID
The local mode is currently established
.
The remote mode is currently established
.
LOCAL
REMOTE
g:MODE=<Mode：ＩＤ>
When the power management mode has been established (standby, power off)
The control mode is usually switched by REMOTE command-LOCAL command, but when the next
event occurs in the remote status, the mode is switched to the local status.
Setting Reference
When the POWER button on the remote control or main unit panel has been pressed twice
(power off operation)
For all other responses, refer to "Error List."
PAGE 73