Filter
Top Products
User Command Specifications
9．Details of command RANGE LAMP
1
RANGE LAMP
RANGE LAMP
RANGE□LAMP
r:LAMP=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE LAMP
< r:LAMP=I, NORMAL, SILENT
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Command
s
supported
Setting Reference
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
○○
X600
SX60
○○○×○○○○
SX6
○○○
– ○○×○○○–
SX50
○○○
S-Video D-Video SCART None
Mode
Remote Local
Remarks
Model Power
Input
D-RGB A-RGB1 A-RGB2 Comp Video
01.00** 01.01** 01.01** 01.01**
○○
Mode Control
(Refer to the ZCONTDRV command and FCONTDRV command.)
The lamp output can be set by the LAMP command.
Lamp output setting option reques
t
SX60 X600
This inquires about the parameter options which enable the lamp output to be set.
ID
SX50 SX6
Example
Description
Response
Commands
Function
Format
PAGE 155