Filter
Top Products
User Command Specifications 9. Details of command WBRGB
1
WBRGB
WBRGB
RGB setting value (Each value –20 to 20)
This sets the RGB adjustment values of the screen color correction.
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
-3
Menu
[Image adjustments] - [Screen color correction] - [Adjustments]
[Display settings] - [Screen color correction] - [Adjustments]
-4
-5
When the model SX6, SX60 or X600 is used, a set of settings is established for the system.
-6
Setting
> WBRGB=10, 11, 12 This sets R to 10, G to 11, and B to 12.
< i:OK
Reference
> GET WBRGB or ?WBRGB This retrieves the RGB adjustment values.
< g:WBRGB=-10, 0, 19
Obtain settable parameter range (Min, Max)
> RANGE WBRGB
< r:WBRGB=N,-20,20,-20,20,-20,20
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Example
Screen color correction (ADJUST
)
With this command, the R, G, and B values can be set in a single operation.
When the model SX50 is used, the currently selected input signal and image mode settings are
The GET command can be used to retrieve the current RGB adjustment values.
X600
It can be executed when the projector is in both the remote mode and power-on status at the
same time.
The RANGE command can be used to obtain the parameter range that can be set at
that time.
Commands
Function
Parameter
This command is the same as the menu functions in the table below.
Although this setting is enabled when Adjustment (ADJUST) is selected by the screen color
correction command (WB), it can be made independently.
Number
Description
Response An 'i:OK' is returned after setting is successful.
Mode
X600SX50 SX6
Model
SX50
SX6
SX60
○○
01.01** 01.01** 01.01**
Model Power
Input
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video
Mode
Remote Local
Remarks
SCART None
SX50
○○○○○○––○○×
SX6
○○○○○○○○○○×
SX60
Format
X600
Control Setting Reference
For details, refer to the GET command.
Any value from -20 to 20 can be set for each color
as the RGB adjustment values.
Command
s
supported
WBRGB=<R adjustment value: Number>▽<G adjustment value: Number>▽<B
adjustment value: Number>
For details, refer to the RANGE command.
For all other responses, refer to "Error List."
(Refer to the ZCONTDRV command and FCONTDRV command.)
○
01.00**
SX60
○
PAGE 37