Filter
Top Products
User Command Specifications ９．Details of command RANGE ZCONTDRV
1
RANGE ZCONTDRV
RANGE ZCONTDRV
RANGE□CONTZDRV
r:ZCONTDRV=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
For all other res
p
onses, refer to
"Error List."
(1)
However, a "busy" response is given if the zoom or focus lens is being driven .
（
Refer to the
ZCONTDRV command and FCONTDRV command.
）
(2)
Continuous control of the zoom lens can be exercised using the
ZCONTDRV command
.
> RANGE ZCONTDRV
<
r:ZCONTDRV=I,
STOP, WIDE, TELE
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
－－－
×○×
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
Commands
su
pp
orted
X600
SX60
○○○×○○○○
SX6
○○○
－－－－－－－－
SX50
－－－
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power supply
Input Mode
Remote Local
×○○○
SX6 SX60 X600
０１．００** ０１．０１** ０１．０１** ０１．０１**
SX50
Commands
Function
Response
Description
Format
Control Setting
Reference
Mode
Example
Zoom lens continuous drive control option request
ＩＤ
This command is used to inquire about the parameter options which enable the zoom lens to be driven
continuously.
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
PAGE 174