Filter
Top Products
User Command Specifications
9．Details of command GET MUTE
1
GET MUTE
GET MUTE
GET□MUTE
?△MUTE
g
:MUTE=<Settin
g
：ＩＤ>
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 Mute control can be set by the MUTE command.
> GET MUTE or ? MUTE
< g:MUTE=ON
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
X600
SX60
○○○○○○○○
SX6
○○○
○ ×○○○––○
SX50
○○○
S-Video D-Video SCART None
Mode
Remote Local
Remarks
Model Power
Input
D-RGB A-RGB1 A-RGB2 Comp Video
○○○○
This returns the audio/beep sound to its original setting
.
This turns off the audio/beep sound.
SX50 SX6 SX60 X600
OFF
Commands
Function
Format
Mute control setting inquir
y
Mode Control Setting Reference
Response
Setting
This inquires about the current mute control setting.
ON
ID
Meaning
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Command
s
supported
Example
Description
01.00** 01.01** 01.01** 01.01**
PAGE 103