Canon SX60 Projector User Manual


 
User Command Specifications 9 .Details of command RANGE PMM
1
RANGE PMM
RANGE PMM
RANGEPMM
r:PMM=I, <Setting option 1>, <Setting option 2>, ..., <Setting option n>
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE PMM
< r:PMM=I, OFF, STANDBY, EXIT
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ×
× ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Commands
Function
Format
Example
Description
Response
Power management setting option reques
t
This inquires about the parameter options which enable power management to be set.
ID
Mode
Control
SX50 SX6 SX60 X600
01.00** 01.01** 01.01** 01.01**
○○
Model Power
Input
D-RGB A-RGB1 A-RGB2 Comp Video
Mode
Remote Local
Remarks
S-Video D-Video SCART None
SX50
○○○○○○––○○×
SX6
○○○ ×○○○○
SX60
X600
○○○
Setting Reference
Command
s
supported
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
Power management can be set by the PMM command.
PAGE 161