Filter
Top Products
User Command Specifications
9．Details of command GET CONT
1
GET CONT
GET CONT
GET□CONT
?△CONT
g
:CONT=<Contrast value: Number>
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The contrast can be set by the CONT command.
> GET CONT or ? CONT
< g:CONT=3
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
○○×
SX60 X600
○○○
○○
X600
○
SX6
○○○
SX60
○○
– ○○×
SX50
○○○ –
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power
Input Mode
Remote Local
○○○○
01.00** 01.01** 01.01** 01.01**
SX6
Commands
Function
Format
Description
Response
This inquires about the current contrast value setting.
Example
Contrast value setting inquir
y
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Command
s
supported
Number
SX50
Mode Control Setting Reference
PAGE 85