Filter
Top Products
User Command Specifications ９．Details of command RANGE 6AXADJ
1
RANGE 6AXADJ
RANGE 6AXADJ
RANGE□6AXADJ
r:6AXADJ=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
For all other res
p
onses, refer to
"Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（
Refer to the
ZCONTDRV command and FCONTDRV command.
）
(2)
ON or OFF for the 6-axis adjustment can be set using the
6AXADJ command
.
> RANGE 6AXADJ
< r:6AXADJ=I, ON, OFF
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
－－－
×○×
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
su
pp
orted
X600
SX60
○○○×○○○○
SX6
○○○
－－－－－－－－
SX50
－－－
ＩＤ
Mode
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video Remote Local
Setting
Model Power supply
Input
NoneS-Video D-Video SCART
SX6
This command is used to inquire about the parameter options which enable the 6-axis adjustment to be set.
SX60 X600
ControlMode
6-axis adjustment option inquiry
SX50
Reference
Commands
Function
Format
Example
Description
Response
０１．００** ０１．０１** ０１．０１** ０１．０１**
×○○○
PAGE 153