Filter
Top Products
User Command Specifications
9．Details of command RANGE ACADJUST
1
RANGE ACADJUST
RANGE ACADJUST
RANGE□ACADJUS
T
r:ACADJUST=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE ACADJUST
< r:ACADJUST=I, NOCORRECT, MEM_L, MEM_M, MEM_H, 6AX
* Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command State
s
OFF ON PM
× ○ ×
–––
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
The advanced color adjustment can be set by the ACADJUST command.
Command
s
supported
Example
01.01**
Reference
For all other responses, refer to "Error List."
Advanced color adjustment option reques
t
This inquires about the parameter options which enable the advanced color adjustment to be set.
ID
Mode
Commands
Function
Format
Description
Response
Control
Setting
Model Power
Input
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video
Mode
Remote Local
Remarks
SCART None
SX50
×××○○○––○○×
SX6
–––––––––––
SX60
X600
01.01** 01.01**
SX50 SX6 SX60 X600
○ ×××
01.00**
PAGE 151