Filter
Top Products
User Command Specifications
9．Details of command RANGE LANG
1
RANGE LANG
RANGE LANG
RANGE□LANG
r:LANG=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE LANG
<
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Commands
Function
Format
Language setting option reques
t
Control
Setting Reference
Example
Description
Response
This inquires about the parameter options which enable the language to be set.
ID
SX50 SX6 SX60 X600
r:LANG=I,ENG,FRA,GER,ITA,SPA,POR,SWE,DUT,RUS,CHS,CHT,KOR,JPN,FIN,NOR,TUR,
POL,HUN,CZE,DAN
Mode
01.00** 01.01** 01.01** 01.01**
○○
Model Power
Input
D-RGB A-RGB1 A-RGB2 Comp Video
Mode
Remote Local
Remarks
S-Video D-Video SCART None
SX50
○○○○○○––○○×
SX6
○○○○○○○○○○×
SX60
X600
Command
s
supported
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
The language can be set by the LANG command.
○○
PAGE 166