Filter
Top Products
User Command Specifications ９．Details of command GET MEMCADJ
1
GET MEMCADJ
GET MEMCADJ
GET□MEMCADJ
?△MEMCADJ
g:MEMCADJ=<Details of adjustment：ＩＤ>
For all other res
p
onses, refer to
"Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（
Refer to the
ZCONTDRV command and FCONTDRV command.
）
(2)
The memory color adjustment can be set using the
MEMCADJ command
.
>
GET MEMCADJ or ? MEMCADJ
<
g:MEMCADJ=MEM_M
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
－－－
×○×
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
－－
X600
SX60
○×○○○○○○
SX6
○○○
－－
Remote Local
SX50
－－－－－－－
SX6
This command is used to inquire about the current memory color adjustment setting.
ＩＤ
Mode
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video
Model Power supply
Input
NoneS-Video D-Video SCART
Reference
Commands
Function
Format
SettingControlMode
Memory color adjustment setting inquiry
０１．０１**
Description
Response
Details of adjustment Meaning
X600SX60SX50
×○○○
OFF No adjustment
MEM_L Low memory color adjustment
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
su
pp
orted
MEM_M Medium memory color adjustment
MEM_H High memory color adjustment
Example
０１．００** ０１．０１** ０１．０１**
PAGE 97