Filter
Top Products
User Command Specifications
9．Details of command RANGE GAMMA
1
RANGE GAMMA
RANGE GAMMA
RANGE□GAMM
A
r:GAMMA=N, <Minimum setting value>, <Maximum setting value>
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE GAMMA
< r:GAMMA=N, -4, 4
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
The gamma adjustment value can be set by the GAMMA command.
Command
s
supported
SX60 X600SX50 SX6
Control Setting Reference
For all other responses, refer to "Error List."
Gamma adjustment range reques
t
Number
Mode
○○○–
○○
Commands
Function
Format
Example
Description
Response
This inquires about the range within which the gamma can be adjusted.
01.00** 01.01** 01.01** 01.01**
Model Power
Input Mode
Remote Local
○○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50
○○○ – ○○×
SX6
○○○ ×○○○○○○○
SX60
X600
PAGE 142