User Command Specifications
9.Details of command RANGE ASPECT
1
RANGE ASPECT
RANGE ASPECT
RANGE□ASPEC
T
r:ASPECT=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
-1
A "busy" response is given while the zoom or focus lens is being driven.
With some input signals, it may not be possible to make this inquiry.
-2
> RANGE ASPECT
< r:ASPECT=I, AUTO, NORMAL, WIDE
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If the command cannot be supported, 'INVALID_MODE,' 'NOT_POWER_SUPPLIED' or 'INVALID_SOURCE' is returned as an error response.
* If the necessary signals are not input, 'INVALID_SIGNAL (*****)' or 'NO_SIGNAL' is returned.
* "i:BUSY" may be returned if the power status is being switched.
Command
s
supported
Mode Control Setting
X600
○○○
SX60
SX6
○○○ ○○×○○
– ○○×
SX50
○○○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power
Input Mode
Remote Local
○○○○
01.01**
Example
Description
Response
01.01**01.00** 01.01**
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
The screen settings can be selected by the ASPECT command.
Commands
Function
Format
Screen setting option reques
t
Reference
○○○–
ID
SX60 X600SX50 SX6
This inquires about the parameter options which enable the screen to be set.
PAGE 137