Filter
Top Products
User Command Specifications 9. Details of command GUID
1
GUIDE
GUIDE
GUIDE=<Guide setting parameter：ＩＤ>
Guide setting parameters
For details, refer to the
RANGE command
.
For all other res
p
onses, refer to
"Error List."
This command is used to set the guide function display to ON or OFF.
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（
Refer to the
ZCONTDRV command and FCONTDRV command.
）
(2)
However, the guide is cleared immediately when "GUIDE=OFF" is received while the guide is displayed.
(3)
For details, refer to the
GET command
.
Setting
> GUIDE=ON The guide display is set to ON.
< i:OK
Reference
> GET GUIDE or ?GUIDE The guide display setting status is obtained.
< g:GUIDE=ON
Acquisition of parameters which can be set
> RANGE GUIDE
< r:GUIDE=I, OFF, ON
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:0002 INVALID_COMMAND" is returned.
Supported Command States
OFF ON PM
－－－
×○×
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
Commands
su
pp
orted ０１．００** ０１．０１** ０１．０１** ０１．０１**
X600
OFF Guide display OFF
The parameters which can be set at any given point in time can be obtained using the
RANGE command.
It can be executed when the projector is in both the remote mode and power-on status at the same
time.
Mode
ＩＤ
Reference
Parameter Meaning
Control
Setting
Guide setting
ON Guide display ON
Example
"i:OK" is returned if the parameter was set properly.Response
This command functions in the same way as when "System settings" - "Guide" are selected on the
menu.
The current guide setting can be obtained using the GET command.
Commands
Function
Parameter
Description
Format
○○○
SX50 SX6 SX60
Model Power supply
Input Mode
Remote Local
×
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50
－－－－－－－－－－－
SX6
○○○ ×○○○○○○○
SX60
X600
PAGE 62