Filter
Top Products
User Command Specifications 9. Details of command POWER
1
POWER
POWER
POWER□<Paramete
r
：ＩＤ>
"i:OK" is returned if the parameter was set properly.
This performs ON/OFF control of the power supply.
-1
-2
However, zoom or focus lens drive stops if the zoom or focus lens is being driven.
-3
-4
Status
Off
○○
Off -> lighted
○○
Lamp on
○○
Lighted -> off
△○
Lighted -> standby
○○
In standby
○
※○
○： i:OK
Standby -> lighted
○○
△
：
i
:
BUSY
-5
Control
> POWER ON
<
i:OK
Reference
> GET POWER or ?POWER
< g:POWER=OFF
Acquisition of parameters which can be set
> RANGE POWER
< r:POWER=I,ON,OFF
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
○○○
○○○
* "i:BUSY" may be returned if the power status is being switched.
(Refer to the ZCONTDRV command and FCONTDRV command.)
POWER ON
POWER OFF
Commands
POWER Command Responses by
Power Supply State
Command
s
supported
The parameters which can be controlled at any given point in time can be obtained
using the RANGE command.
For details, refer to the RANGE command.
For all other responses, refer to "Error List."
This command is identical to pressing the POWER button on the remote control or main unit.
After sending this command, use GET POWER to obtain the power supply state at regular
intervals, and check that it is in the controlled state (off or on).
The table below shows the POWER command responses according to the power supply state.
For details, refer to the GET command.
The current power supply status can be referenced using the applicable GET command.
This controls the power suppl
y
Mode Control Setting ReferenceCommands
Function
Paramete
r
Paramete
r
Meaning
Example
○
SX50
01.00** 01.01** 01.01** 01.01**
SX6 SX60 X600
○
Model Power
Input Mode
Remote Local
○○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50
○○○○○○––○○×
SX6
○○○○○○○○○○×
SX60
X600
Provided that the remote mode is established, the command can be executed in any projector
status.
Description
Format
ID
OFF Power OFF
Response
ON Power ON
PAGE 16