Canon SX60 Projector User Manual


 
User Command Specifications 9. Details of command HUE
1
HUE
HUE
HUE=<Hue setting valueNumber>
Hue setting (-20 to 20)
This sets the screen hue.
-1
A "busy" response is given while the zoom or focus lens is being driven.
Furthermore, it may not be possible to execute the command with some input signals.
-2
Menu
[Image adjustments] - [Hue]
[Image adjustments] - [Color adjustments] - [Hue]
-3
-4
-5
Setting
> HUE=8 This sets the hue to +8.
< i:OK
Reference
> GET HUE or ?HUE This retrieves the hue.
< g:HUE=1
Obtain settable parameter range (Min, Max)
> RANGE HUE
< r:HUE=N,-20,20 Any value from -20 to 20 can be set for the hue.
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
* If the command cannot be supported, 'INVALID_MODE,' 'NOT_POWER_SUPPLIED' or 'INVALID_SOURCE' is returned as an error response.
* If the necessary signals are not input, 'INVALID_SIGNAL (*****)' or 'NO_SIGNAL' is returned.
* "i:BUSY" may be returned if the power status is being switched.
The RANGE command can be used to obtain the parameter range that can be set at
that time.
It can be executed when the projector is in both the remote mode and power-on status at the
same time.
SX60 X600
01.00** 01.01** 01.01** 01.01**
SX50 SX6
This sets the currently selected input signal and image mode.
The GET command can be used to retrieve the current hue.
SX60
Commands
Example
Hue setting
"i:OK" is returned if the parameter was set properly.
Function
Parameter
Description
Response
An input signal is required when “VIDEO” or “S-VIDEO” is selected.
This command is the same as the menu functions in the table below.
Model
SX50
SX6
LocalSCART None
○○○○
D-Video
Model Power
Input
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video
Mode
Remote
×
––
×
×××
X600
×
×
SX60
SX6
×
×
○○
×
×
×
Format
×
SX50 ×
××
Mode Control Setting Reference
Command
s
supported
For details, refer to the RANGE command.
For all other responses, refer to "Error List."
(Refer to the ZCONTDRV command and FCONTDRV command.)
For details, refer to the GET command.
X600
Number
PAGE 39