Filter
Top Products
User Command Specifications ９．Details of command RANGE FCONTDRV
1
RANGE FCONTDRV
RANGE FCONTDRV
RANGE□FCONTDRV
r:FCONTDRV=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
For all other res
p
onses, refer to
"Error List."
(1)
However, a "busy" response is given if the zoom or focus lens is being driven .
（
Refer to the
ZCONTDRV command and FCONTDRV command.
）
(2)
Continuous control of the focus lens can be exercised using the
FCONTDRV command
.
> RANGE FCONTDRV
< r:FCONTDRV=I, STOP, FAR, NEAR
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
－－－
×○×
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
Commands
su
pp
orted
Example
Focus lens continuous drive control option request
ＩＤ
This command is used to inquire about the parameter options which enable the focus lens to be driven
continuously.
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
０１．００** ０１．０１**
Control Setting
Reference
ModeCommands
Function
Response
Description
Format
０１．０１** ０１．０１**
SX50
○○
SX6 SX60 X600
Model Power supply
Input Mode
Remote Local
×○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50
－－－－－－－－－－－
SX6
○○○○○○○○○○×
SX60
X600
PAGE 176