Filter
Top Products
User Command Specifications ９．Details of command RANGE LEDILLUMINATE
1
RANGE LEDILLUMINATE
RANGE LEDILLUMINATE
RANGE□LEDILLUMINATE
r:LEDILLUMINATE=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
For all other res
p
onses, refer to
"Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（
Refer to the
ZCONTDRV command and FCONTDRV command.
）
(2)
LED lighting control can be set using the
LEDILLUMINATE command
.
> RANGE LEDILLUMINATE
< r:LEDILLUMINATE=I, ON, OFF
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
ーーー
×○×
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
Commands
su
pp
orted
Example
Description
Response
ＩＤ
This command is used to inquire about the parameter options which enable emotional LED and signal
sensing LED lighting control to be set.
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
Function
Format
Emotional LED and signal sensing LED lighting setting option request
Reference
SettingControlMode
SX50 SX6 SX60 X600
０１．００** ０１．０１** ０１．０１** ０１．０１**
×○○○
Model Power supply
Input
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video
Mode
Remote Local
Remarks
SCART None
SX50
ーーーーーー- -ーーー
SX6
○○○○○○○○○○×
SX60
X600
PAGE 172