Filter
Top Products
User Command Specifications ９．Details of command GET GUID
1
GET GUIDE
GET GUIDE
GET□GUIDE
?△GUIDE
g:GUIDE=<Setting：ＩＤ>
For all other res
p
onses, refer to
"Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（
Refer to the
ZCONTDRV command and FCONTDRV command.
）
(2)
The guide can be set using the
GUIDE command
.
>
GET GUIDE or ? GUIDE An inquiry is made about the current guide setting.
<
g:GUIDE=OFF
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
ーーー
×○×
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
X600
SX60
○×○○○○○○
SX6
○○○
ーーーーー- -ー
SX50
ーーー
S-Video D-Video SCART None
Mode
Remote Local
Remarks
Model Power supply
Input
D-RGB A-RGB1 A-RGB2 Comp Video
×○○○
０１．００** ０１．０１** ０１．０１** ０１．０１**
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
SX50 SX6 SX60 X600
Mode
OFF Guide display OFF
Guide display ON
Commands
Function
Format
Guide setting inquiry
Reference
SettingControl
This command is used to inquire about the current guide setting.
Setting Meaning
ON
ＩＤ
Commands
su
pp
orted
Example
Description
Response
PAGE 115