Filter
Top Products
User Command Specifications
9．Details of command RANGE SHARP
1
RANGE SHARP
RANGE SHARP
RANGE□SHAR
P
r:SHARP=N, <Minimum setting value>, <Maximum setting value>
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE SHARP
< r:SHARP=N, -4, 4
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Command
s
supported
○○○
01.00** 01.01**
SX60
X600
SX60
○○○×○○○○
SX6
○○○
Model Power
Input
×
SX50
○○○
Mode
Remote LocalD-RGB A-RGB1 A-RGB2 Comp None
Example
Description
Response
01.01**
SX50 SX6
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
The sharpness can be set by the SHARP command.
Number
Mode
Commands
Function
Format
Control
Setting Reference
Sharpness setting range reques
t
– ○○ –
○
○
This inquires about the range within which the sharpness can be set.
01.01**
Remarks
Video S-Video D-Video SCART
○○
X600
PAGE 141