Filter
Top Products
User Command Specifications ９．Details of command RANGE MEMCADJ
1
RANGE MEMCADJ
RANGE MEMCADJ
RANGE□MEMCADJ
r:MEMCADJ=I, <Setting option 1>, <Setting option 2>, …, <Setting option n>
For all other responses, refer to "Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（
Refer to the
ZCONTDRV command and FCONTDRV command.
）
(2)
The memory color adjustment can be set using the
MEMCADJ command
.
> RANGE MEMCADJ
< r:MEMCADJ=I, OFF, MEM_L, MEM_M, MEM_H
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
－－－
×○×
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
×○○○
Example
Description
Response
０１．００**
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
su
pp
orted
Mode
０１．０１** ０１．０１** ０１．０１**
This command is used to inquire about the parameter options which enable the memory color adjustment
to be set.
SX50 SX6
ＩＤ
SX60 X600
Format
Memory color adjustment setting option request
Reference
Commands
Function
SettingControl
Model Power supply
Input
None
Mode
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART Remote Local
SX50
－－－－－－－－－－－
SX6
○○○ ×○○ ○○○○○
SX60
X600
PAGE 152