Filter
Top Products
User Command Specifications
9. Details of command LANG
1
LANG
LANG
LANG=<Language selection parameter
s
：ＩＤ>
Language selection parameters
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
Menu
[System settings] - [Languages]
[System settings] - [Languages]
-3
Setting
> LANG=SWE This sets the display language to “Swedish”.
< i:OK
Reference
> GET LANG or ?LANG This retrieves the language.
< g:LANG=SWE
Acquisition of parameters which can be set
> RANGE LANG
<
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command State
s
OFF ON PM
× ○ ×
× ○ ×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
"i:OK" is returned if the parameter was set properly.
ID
○
○
○○
○
○
○
○
０１．００** ０１．０１**
It can be executed when the projector is in both the remote mode and power-on status at the
same time.
r:LANG=I,ENG,FRA,GER,ITA,SPA,POR,SWE,DUT,RUS,CHS,CHT,KOR,JPN,FIN,NOR,TUR,
POL,HUN,CZE,DAN
The currently set language can be acquired using the applicable GET command.
X600
SX50
01.01**
○
This command is the same as the menu functions in the table below.
○○
Danish
SX50
ITA
Portuguese
○
○
○
DAN
Hungarian
NOR
POL Polish
CZE Czech
English
SWE
GER German
Spanish
FRA French
SPA
Commands
Function Language selec
t
POR
Parameter Meaning
Italian
○
Parameter
ENG
○
RussianRUS
Example
Finnish
Description
Response
Model
SX6
SX60
Norwegian
Swedish
Chinese (simplified)
KOR
DUT Dutch
CHS
FIN
Errors supported by model
SX50 SX6 SX60 X600
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
For details, refer to the GET command.
○
○
TUR Turkish
This switches the screen display language.
HUN
○
○
○○
○
○
SX60
○
X600
01.01**
Model Power
Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50
○○○○○○––○○×
SX6
○○○○○○○○○○×
SX60
X600
Format
○
○
○
○
○
○
○
○
×
×
○
CHT
×
×
×
○
Korean
Chinese (traditional)
×
×
○
○
○
○
○
○
○○
○
○
○
○
○
○
○○
○
○
JPN Japanese
○
○○○
○
Mode
Control Setting Reference
Command
s
supported
The parameters which can be set at any given point in time can be obtained using the
RANGE command.
For details, refer to the RANGE command.
For all other responses, refer to "Error List."
(Refer to the ZCONTDRV command and FCONTDRV command.)
○○○
SX6
PAGE 58