Filter
Top Products
User Command Specifications ９．Details of command GET NOSHOWSTATUS
1
GET NOSHOWSTATE
GET NOSHOWSTATE
GET□NOSHOWSTATE
?△NOSHOWSTATE
g:NOSHOWSTATE=<Status：ＩＤ>
For all other res
p
onses, refer to
"Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（
Refer to the
ZCONTDRV command and FCONTDRV command.
）
(2)
No show status ON/OFF is controlled using the "RC NOSHOW" command in the local mode. (Toggling)
>
GET NOSHOWSTATE or ? NOSHOWSTATE
<
g:NOSHOWSTATE=ON
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
－－－
×○×
* If the command cannot be supported, "NOT_POWER_SUPPLIED" is returned as an error response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
X600
SX60
○○○○○○○○
SX6
○○○
－－－－－－－－
SX50
－－－
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power supply
Input Mode
Remote Local
×○○○
０１．００** ０１．０１** ０１．０１** ０１．０１**
SX50 SX6 SX60 X600
Mode
OFF Screen not temporarily off
ON Screen temporarily off
Commands
Function
Format
NoShow status inquiry
Reference
SettingControl
This inquiry can be made at any time provided that the power-on status is established.
This command is used to inquire about the current NoShow status.
Status Meaning
ＩＤ
Commands
su
pp
orted
Example
Description
Response
PAGE 118