Filter
Top Products
15-20
User Guide for Cisco Digital Media Manager 5.4.x
OL-15762-05
Chapter 15 Touchscreens, Projectors, and Displays
Procedures
Step 5
Set other, optional values as needed.
Step 6
Click Submit to save your work, so that you might someday use it.
OR
Click Cancel to discard your work.
Step 7
Stop. You have completed this procedure.
What to Do Next
•
Would you like to delete a saved command?
Proceed to the “Delete Equipment Settings That Use RS-232 Syntax” section on page 15-20.
Delete Equipment Settings That Use RS-232 Syntax
You can delete any of your named and saved RS-232 command strings.
Procedure
Step 1
Click Network and Endpoints.
Step 2
Choose Digital Media Players > Advanced Tasks.
Panel Lock
3
On
— rs232.tx_hex=
AA5FFF010160
——rs232.tx_hex=
AA5FFF010160
rs232.tx_hex=
346230313130333030310D
Off
— rs232.tx_hex=
AA5FFF01005F
——rs232.tx_hex=
AA5FFF01005F
rs232.tx_hex=
346230313130333030300D
Safety Lock
4
On
rs232.tx_hex=
6B6D2030312030310D
rs232.tx_hex=
AA5DFF01015E
rs232.tx_hex=
6B6D2030312030310D
rs232.tx_hex=
6B6D2030312030310D
rs232.tx_hex=
AA5DFF01015E
—
Off
rs232.tx_hex=
6B6D2030312030300D
rs232.tx_hex=
AA5DFF01005D
rs232.tx_hex=
6B6D2030312030300D
rs232.tx_hex=
6B6D2030312030300D
rs232.tx_hex=
AA5DFF01005D
—
1. An image with a colorfulness value of zero percent is grayscale, while the same image with a colorfulness value of 100 percent has vivid colors.
2. The display ignores its handheld remote control but still responds to other commands.
3. The display ignores its built-in buttons but still responds to other commands.
4. Control the display exclusively through your DMP. Neither the handheld remote control nor buttons on the display can override your off-site management.
Table 15-1 RS-232 Commands to Manage Cisco LCD Displays (continued)
Task
Hexadecimal RS-232 Command Strings
32-inch LCD-PRO 40-inch LCD-PRO 42-inch LCD-PRO 47-inch LCD PRO 52-inch LCD-PRO 55-inch LCD-PRO