Filter
Top Products
19-11
User Guide for Cisco Digital Media Manager 5.4.x
OL-15762-05
Chapter 19 Content Distribution and Delivery
Concepts
Best Practices
We recommend that you apply these DMS-CD best practices in your network whenever possible.
•
Create and maintain only one deployment package for any DMP group whose constituent DMPs
should play assets from local storage. Simply configure its deployment to recur nightly (or whatever
other time has the least possible impact on your audience). Then, modify it as necessary, to:
–
Include all new or changed assets that member DMPs should obtain or keep for playback.
–
Remove obsolete assets that member DMPs should autoclean from local storage.
DMS-CD syncs DMP storage with the current version of the deployment package and applies all
changes automatically.
Note This method is simpler and more scalable than developing and maintaining a new package and
scheduling a new deployment each time that your needs change. Also, it increases the likelihood that large
deployments will resume and be completed successfully on a slow connection. Furthermore, it prevents deployments
from becoming too numerous to manage.
•
Even if you have not imposed any bandwidth restrictions upon DMS-CD, avoid scheduling
deployments and playback to run in parallel on DMPs. Otherwise, deployments can take longer to
finish than you anticipate. (This delay occurs because the load is doubled on DMPs.) For best
results, schedule DMS-CD deployments to run when no playback is scheduled. During such times,
there is little or no load on DMPs.
•
When playback and deployments must overlap, configure an upper threshold for DMS-CD
bandwidth consumption. The value that you enter should be less than your network’s maximum
transfer rate. Adjust and test values as necessary, until you determine exactly how much bandwidth
DMS-CD can use in your WAN without affecting DMP performance.
Tip Use the “Enable maximum transfer rate” field (at Digital Media Players > Deployment Manager >
Deployment Preferences) to limit DMS-CD bandwidth consumption.
Note In our tests, we found that using 5 Mbps as the upper threshold provided adequate bandwidth restriction in
most cases. However, this is not necessarily a value that you should use. Results will vary depending on network
capacity and the load placed on a DMP.
Related Topics
•
Configure Deployment Threshold Preferences for DMS-CD, page 19-19