Filter
Top Products
System Setup Program 111
1
System Setup Program
Overview
NOTE: Your operating system may automatically configure most of the options available in the system
setup program, thus overriding options that you set through the system setup program. (An exception is
the External Hot Key option, which you can disable or enable only through the system setup program.) For
more information on configuring features for your operating system, access the Help and Support Center
(click Start
→
Help and Support).
You can use the system setup program as follows:
• To set or change user-selectable features—for example, your computer password
• To verify information about the computer's current configuration, such as the amount of
system memory
After you set up the computer, run the system setup program to familiarize yourself with your
system configuration information and optional settings. You may want to write down the
information for future reference.
The system setup screens display the current setup information and settings for your computer,
such as:
• System configuration
• Boot order
• Boot (start-up) configuration and docking-device configuration settings
• Basic device-configuration settings
• System security and hard-drive password settings
NOTE: Unless you are an expert computer user or are directed to do so by Dell technical support, do not
change the system setup settings. Certain changes might make your computer work incorrectly.
Viewing the System Setup Screens
1
Turn on (or restart) your computer.
2
When the DELL™ logo appears, press <F2> immediately. If you wait too long and the
Microsoft
®
Windows
®
logo appears, continue to wait until you see the Windows desktop.
Then shut down your computer and try again.