Filter
Top Products
Using Cards 69
The computer recognizes most PC Cards and automatically loads the appropriate device driver. If
the configuration program tells you to load the manufacturer's drivers, use the floppy disk or CD
that came with the PC Card.
ExpressCards
1
Place the ExpressCard in the adapter (the adapter is included with the ExpressCard).
2
Install the ExpressCard with the adapter the same way as a PC Card. (See "PC Cards" on
page 67)
Removing a Card or Blank
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide
.
NOTICE: Click the icon in the taskbar to select a card and stop it from functioning before you
remove it from the computer. If you do not stop the card in the configuration utility, you could lose data.
Do not attempt to eject a card by pulling its cable, if one is attached.
Press the latch and remove the card or blank. For some latches, you must press the latch twice: once
to pop the latch out, and then a second time to pop the card out.