Filter
Top Products
97
To set the ingress checking status, the sending and receiving GVRP information :
DES-3550:4#config gvrp 1-4 state enable ingress_checking enable
acceptable_frame tagged_only pvid 2
Command: config gvrp 1-4 state enable ingress_checking enable
acceptable_frame tagged_only pvid 2
Success.
DES-3550:4#
enable gvrp
Purpose Used to enable GVRP on the switch.
Syntax
enable gvrp
Description
This command, along with
disable gvrp
below, is used to enable
and disable GVRP on the switch, without changing the GVRP
configuration on the switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable the generic VLAN Registration Protocol (GVRP):
DES-3550:4#enable gvrp
Command: enable gvrp
Success.
DES-3550:4#
disable gvrp
Purpose Used to disable GVRP on the switch.
Syntax
disable gvrp
Description
This command, along with
disable gvrp
below, is used to enable
and disable GVRP on the switch, without changing the GVRP
configuration on the switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable the Generic VLAN Registration Protocol (GVRP):