Filter
Top Products
32
delete snmp view
Syntax
delete snmp view <view_name 32> [all | <oid>]
Description
The
delete snmp view
command is used to remove an SNMP view
previously created on the switch.
Parameters
<view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view to be deleted.
all − Specifies that all of the SNMP views on the switch will be
deleted.
<oid> − The object ID that identifies an object tree (MIB tree) that
will be deleted from the switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete a previously configured SNMP view from the switch:
DES-3550:4#delete snmp view dlinkview all
Command: delete snmp view dlinkview all
Success.
DES-3550:4#
show snmp view
Purpose Used to display an SNMP view previously created on the switch.
Syntax
show snmp view {<view_name 32>}
Description
The
show snmp view
command displays an SNMP view previously
created on the switch in the VACM View Table Settings.
Parameters
<view_name 32>
−
An alphanumeric string of up to 32 characters
that identifies the SNMP view that will be displayed.
Restrictions None.
Example usage:
To display SNMP view configuration:
DES-3550:4#show snmp view
Command: show snmp view
Vacm View Table Settings
View Name Subtree View Type
-------------------- ------------------------- ----------
ReadView 1 Included
WriteView 1 Included
NotifyView 1.3.6 Included
restricted 1.3.6.1.2.1.1 Included
restricted 1.3.6.1.2.1.11 Included