Filter
Top Products
31
DES-3550:4#show snmp user
Command: show snmp user
Username Group Name Ver Auth Priv
--------------- -------------- ----- -------- -------
initial initial V3 None None
Total Entries: 1
DES-3550:4#
create snmp view
Purpose Used to assign views to community strings to limit which MIB objects
and SNMP manager can access.
Syntax
create snmp view <view_name 32> <oid> view_type [included |
excluded]
Description The
create snmp view
command assigns views to community
strings to limit which MIB objects an SNMP manager can access.
Parameters <view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view that will be created.
<oid> − The object ID that identifies an object tree (MIB tree) that will
be included or excluded from access by an SNMP manager.
included − Include this object in the list of objects that an SNMP
manager can access.
excluded − Exclude this object from the list of objects that an SNMP
manager can access.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create an SNMP view:
DES-3550:4#create snmp view dlinkview 1.3.6 view_type
included
Command: create snmp view dlinkview 1.3.6 view_type included
Success.
DES-3550:4#
delete snmp view
Purpose Used to remove an SNMP view entry previously created on the
switch.