Filter
Top Products
34
DES-3550:4#create snmp community dlink view ReadView
read_write
Command: create snmp community dlink view ReadView
read_write
Success.
delete snmp community
Purpose Used to remove a specific SNMP community string from the switch.
Syntax
delete snmp community <community_string 32>
Description
The
delete snmp community
command is used to remove a
previously defined SNMP community string from the switch.
Parameters
<community_string 32> − An alphanumeric string of up to 32
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the switch’s SNMP agent.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the SNMP community string “dlink:”
DES-3550:4#delete snmp community dlink
Command: delete snmp community dlink
Success.
DES-3550:4#
show snmp community
Purpose Used to display SNMP community strings configured on the switch.
Syntax
show snmp community {<community_string 32>}
Description
The
show snmp community
command is used to display SNMP
community strings that are configured on the switch.
Parameters
<community_string 32> − An alphanumeric string of up to 32
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the switch’s SNMP agent.
Restrictions None.
Example usage:
To display the currently entered SNMP community strings: