Filter
Top Products
186
config admin local_enable
Parameters <password 15> - After entering this command, the user will be
prompted to enter the old password, then a new password in an
alphanumeric string of no more than 15 characters, and finally
prompted to enter the new password again to confirm. See the
example below.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the password for the “local_enable” authentication method.
DES-3550:4#config admin local_enable
Command: config admin local_ebable
Enter the old password:
Enter the case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DES-3550:4#