Filter
Top Products
37
create snmp group
manager.
auth_nopriv − Specifies that authorization will be required, but there
will be no encryption of packets sent between the switch and a
remote SNMP manager.
auth_priv − Specifies that authorization will be required, and that
packets sent between the switch and a remote SNMP manger will be
encrypted.
read_view – Specifies that the SNMP group being created can
request SNMP messages.
write_view – Specifies that the SNMP group being created has write
privileges.
<view_name 32> − An alphanumeric string of up to 32 characters that
is used to identify the group of MIB objects that a remote SNMP
manager is allowed to access on the switch.
notify_view − Specifies that the SNMP group being created can
receive SNMP trap messages generated by the switch’s SNMP
agent.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create an SNMP group named “sg1:”
DES-3550:4#create snmp group sg1 v3 noauth_nopriv read_view v1
write_view v1 notify_view v1
Command: create snmp group sg1 v3 noauth_nopriv read_view v1
write_view v1 notify_view v1
Success.
DES-3550:4#
delete snmp group
Purpose Used to remove an SNMP group from the switch.
Syntax
delete snmp group <groupname 32>
Description
The
delete snmp group
command is used to remove an SNMP
group from the switch.
Parameters
<groupname 32>
−
An alphanumeric name of up to 32 characters
that will identify the SNMP group the new SNMP user will be
associated with.
Restrictions Only administrator-level users can issue this command.
Example usage: