Filter
Top Products
140
Example usage:
To configure the access profile with the profile ID of 1 to filter frames that have IP addresses in the range between
10.42.73.0 to 10.42.73.255:
DES-3550:4# config access_profile profile_id 2 add access_id 1
ip source_ip 10.42.73.1 deny
Command: config access_profile profile_id 1 add access_id 1 ip
source_ip 10.42.73.1 deny
Success.
DES-3550:4#
show access_profile
Purpose Used to display the currently configured access profiles on the
switch.
Syntax
show access_profile
Description
The
show access_profile
command is used to display the currently
configured access profiles
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To display all of the currently configured access profiles on the switch:
DES-3550:4#show access_profile
Command: show access_profile
Access Profile Table
Access Profile ID : 4
Type : IP Frame Filter
Ports : All
Masks : VLAN
----------------
ID Mode
--- ------ ----------------
1 Permit default
Access Profile ID : 246
Type : IP Frame Filter