Filter
Top Products
200
config arpentry
config authen application
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
config command_history
Purpose Used to configure the command history.
Syntax
config command_history <value 1-40>
Description This command is used to configure the command history.
Parameters
<value 1-40> − the number of previously executed commands
maintained in the buffer. Up to 40 of the latest executed commands
may be viewed.
Restrictions None.
Example usage
To configure the command history:
DES-3550:4#config command_history 20
Command: config command_history 20
Success.
DES-3550:4#
show command_history
Purpose Used to display the command history.
Syntax
show command_history
Description This command will display the command history.
Parameters None.
Restrictions None.
Example usage
To display the command history:
DES-3550:4#show command_history
Command: show command_history
?
? show
show vlan
show command history
DES-3550:4#