Filter
Top Products
50
To download a configuration file:
DES-3550:4#download configuration 10.48.74.121 c:\cfg\setting.txt
Command: download configuration 10.48.74.121 c:\cfg\setting.txt
Connecting to server................... Done.
Download configuration............. Done.
DES-3550:4#
config firmware
Purpose Used to configure the firmware section as a boot up section, or to
delete the firmware section
Syntax
config firmware section_id <int 1-2> [delete | boot_up]
Description This command is used to configure the firmware section. The user
may choose to remove the firmware section or use it as a boot up
section.
Parameters section_id – Specifies the working section. The Switch can hold two
firmware versions for the user to select from, which are specified by
section id.
delete – Entering this parameter will delete the specified firmware
section.
boot_up – Entering this parameter will specify the firmware section id
as a boot up section.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure firmware section 1 as a boot up section:
DES-3550:4# config firmware section_id 1 boot_up
Command: config firmware section_id 1 boot_up
Success.
DES-3550:4#
show firmware information
Purpose Used to display the firmware section information.
Syntax
show firmware information
Description This command is used to display the firmware section information
Parameters None.