Filter
Top Products
190
show sim
(L3).
Platform – Switch Description including name and model number.
SIM State –Displays the current Single IP Management State of the
switch, whether it be enabled or disabled.
Role State – Displays the current role the switch is taking, including
Commander, Member or Candidate. A Stand-alone switch will always
have the commander role.
Discovery Interval - Time in seconds the switch will send discovery
packets out over the network.
Hold time – Displays the time in seconds the switch will hold discovery
results before dropping it or utilizing it.
Parameters candidates <candidate_id 1-32> - Entering this parameter will display
information concerning candidates of the SIM group. To view a specific
candidate, include that candidate’s id number, listed from 1 to 32.
members <member_id 1-32> Entering this parameter will display
information concerning members of the SIM group. To view a specific
member, include that member’s id number, listed from 1 to 32.
group commander_mac <macaddr>- Entering this parameter will
display information concerning the SIM group. To view a specific
group, include the commander’s MAC address of the group.
Neighbor – Entering this parameter will display neighboring devices of
the switch. A SIM neighbor is defined as a switch that is physically
connected to the switch but is not part of the SIM group. This screen
will produce the following results:
Port – Displays the physical port number of the commander
switch where the uplink to the neighbor switch is located.
MAC Address – Displays the MAC Address of the neighbor
switch.
Role – Displays the role(CS, CaS, MS) of the neighbor switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To show the SIM information in detail:
DES-3550:4#show sim
Command: show sim
SIM Version : VER-1
Firmware Version : Build 1.00-B02
Device Name :
MAC Address : 00-35-26-11-11-00
Capabilities : L3