Filter
Top Products
52
To upload a configuration file:
DES-3550:4#upload configuration 10.48.74.121 c:\cfg\log.txt
Command: upload configuration 10.48.74.121 c:\cfg\log.txt
Connecting to server................... Done.
Upload configuration...................Done.
DES-3550:4#
ping
Purpose Used to test the connectivity between network devices.
Syntax
ping <ipaddr> {times <value 1-255>} {timeout <sec 1-99>}
Description The ping command sends Internet Control Message Protocol (ICMP)
echo messages to a remote IP address. The remote IP address will
then “echo” or return the message. This is used to confirm
connectivity between the switch and the remote device.
Parameters <ipaddr> - Specifies the IP address of the host.
times - The number of individual ICMP echo messages to be sent.
A value of 0 will send an infinite ICMP echo messages. The
maximum value is 255. The default is 0.
timeout - Defines the time-out period while waiting for a response
from the remote device.
A value of 1 to 99 seconds can be specified. The default is 1 second
Restrictions None.
Example usage:
To ping a device with the IP address 10.48.74.121 four times:
DES-3550:4#ping 10.48.74.121 times 4
Command: ping 10.48.74.121
Reply from 10.48.74.121, time<10ms
Reply from 10.48.74.121, time<10ms
Reply from 10.48.74.121, time<10ms
Reply from 10.48.74.121, time<10ms
Ping statistics for 10.48.74.121
Packets: Sent =4, Received =4, Lost =0
DES-3550:4#